BRAYER BR4204, Instruction Manual

Page: 8 / 48

8 EN
USING THE ATTACHMENTS
Floor/carpet brush (1)
• When using the brush (1) set the switch (2) to the
necessary «FLOOR/CARPET» position.
Parquet flooring attachment (27)
• Use the attachment (27) for cleaning smooth polished
parquet or laminate flooring.
Crevice nozzle (28)
• Use the crevice nozzle (28) for cleaning radiators,
crevices, spaces between couch cushions and such.
Furniture/furniture upholstery brush (29)
• Use the attachment (29) to clean the furniture
upholstery.
Attachment holder (30)
• Place the holder (30) on the telescopic pipe (4), fasten
the required attachments to the holder (30).
ASSEMBLING THE VACUUM CLEANER
Attaching and removing the flexible hose (7)
• Insert the flexible hose (7) ending (8) into the air inlet
(10) until the locks (9) catch (pic. 1).
• To remove the flexible hose (7), press the locks (9) and
detach the ending (8) from the air inlet (10).
Attaching the telescopic pipe (4) and the
attachments
• Attach the telescopic extension pipe (4) to the flexible
hose handle (5) (pic. 2).
• Extend the lower part of the telescopic extension
pipe (4) to the required length, having preliminarily
pressed the lock (3).
• Choose the required attachment - floor/carpet brush
(1), crevice nozzle (28), combined crevice nozzle
(29) or parquet flooring attachment (27) and attach it
to the telescopic extension pipe (4) (pic. 3).
• You can attach the crevice nozzle (28) and the
combined crevice nozzle (29) to the flexible hose
handle (5).
ATTENTION!
• Do not use the vacuum cleaner in places where
aerosols are used or sprayed and in proximity to
highly inflammable liquids, do not use the vacuum
cleaner in the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting
water or any other liquids; do not use it for collecting
burning or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before
cleaning to prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it off immediately,
unplug it and check the telescopic pipe (4) or