BRAYER BR4123, Instruction Manual

Page: 6 / 44

6 EN
• Ensure that water level is not above the maximal
mark «MAX». If the water level exceeds the maximal
mark, water may splash out of the garment steamer.
• Do not block and do not insert any foreign objects
into the steam release openings.
• During the operation the upper part of the garment
steamer body becomes hot. To avoid getting burns,
hold the garment steamer by the handle on the same
level with the steam supply on button.
• Avoid getting burns by hot steam.
• Never steam clothes on a person, always use a
hanger.
• Never direct operating steamer onto people,
animals and plants as well as onto furniture, electric
appliances, books and any other objects that can be
damaged by hot steam. The garment steamer should
be at least 20 cm away from any interior objects.
• Do not use the power cord as a handle for carrying
the garment steamer, carry it by the handle.
• Unplug the unit after usage or before cleaning.
• Switch the garment steamer off and unplug the power
cord plug from the mains socket.
• When unplugging the unit, hold the power plug and
carefully remove it from the mains socket, do not pull
the power cord, as this can lead to its damage and
cause a short circuit.
• For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!