7
EN
• Make sure that the crumb tray (8) is installed.
• Put two slices of bread into the slots for bread
toasting (1).
• Insert the power cord plug into the power outlet.
• Set the toasting level of the toasts by turning the
control knob (4):
«1» - minimal toasting level;
«7» - maximal toasting level.
Notes:
- the toasting level depends on the sort of bread
and thickness of slices. Optimal thickness of the
slices should not exceed 20-25 mm;
- select the toasting level by setting the control knob
(4) to the needed position.
- do not use very thin slices of bread, because they
do not center in the toaster.
•
Press on the carriage control lever (2) until fixed, the
toasting stop button (3) «CANCEL» illumination will
light up.
• When the toasts are ready, the toaster will be
switched off automatically, the lever (2) will return to
its initial position.
TOASTING STOP BUTTON (3) «CANCEL»
•
If you need to switch the toaster off or stop the
toasting process, press the button (3) «CANCEL».
•
The toaster will be switched off, and the lever (2) will
return to the initial position.
DEFROSTING MODE BUTTON (6) «DEFROST»
•
To toast frozen bread, put the slices of bread into
the slots for toasting (1). Set the required degree
of toasting with the regulator (4), press the toaster
actuating lever (2) until it locks, then press the «
DEFROST» button (6), and the illumination of the «
DEFROST» button (6) will light up.
• • When the toasts are ready, the toaster will be
switched off automatically, the lever (2) will return to
its initial position.
REHEATING MODE BUTTON (5) «REHEAT»
• To reheat the cooled toasts, lower the toasts into the
holes (1), press the toaster actuating lever (2) until it
locks, then press the «reheat» button (5) «REHEAT»
while the illumination of the button (5) «REHEAT»
will light up.
• When the toasts are ready, the toaster will be
switched off automatically, the lever (2) will return to
its initial position.
CRUMB TRAY
• Bread crumbs are accumulated in the tray (8),
regularly clean the tray (8).
•
Switch the toaster off and unplug the power cord plug
from the mains socket, wait until the toaster cools
down.
•
Remove the crumb tray (8), clean it off the crumbs
and install the tray back to its place.
