9
EN
•
Do not use your fingers or any utensil other than
the included plunger (9) while inserting fruits and
vegetables into the feeding chute (1).
•
Regularly check the filter element (2) for clogging
with pulp, if necessary switch the juice extractor off by
setting the power switch (6) to the «0» position, and
disconnect the power plug from the electrical outlet.
•
Turn the feeding chute (1) with the filter element (2)
counterclockwise until the «▲» mark matches the «
» mark on the top of the motor unit and remove
them (Fig. 1), rinse the filter element (2) under running
water and install it back by turning the feeding chute
(1) with the filter element (2) clockwise to «
» (Fig. 7).
Make sure the feeding chute (1) with the filter element
(2) are securely fixed, insert the power cord plug into
an electrical outlet, switch the juice extractor on to
continue the operation.
•
To mix different juices while the juice extractor is
running you can close the juice spout (5) lid (fig. 9) and
continue pressing juice from another fruit or vegetable,
then open the spout (5) lid and pour the juice into the
cup (7).
•
Close the spout (5) lid when pouring the juice from the
cup (7) or when the juice extractor operation is finished.
•
If the auger (3) slows down during the juice extractor
operation, immediately switch the juice extractor off by
setting the power switch (6) to the «0» position, after
the auger (3) stops rotating, move the power switch (6)
to the «R» position and hold it, the auger (3) reverse
rotation function will be activated. After a few seconds
release the power switch (6), disconnect the power
cord plug from the electrical outlet, turn the feeding
chute (1) with the filter element (2) counterclockwise
until the «▲» mark matches the «
» mark on
the top of the motor unit, and remove them (fig. 1),
eliminate the cause of the auger (3) slow rotation.
Having eliminated the cause, install the feeding chute
(1) with the filter element (2) and continue using the
juice extractor.
•
Once the juice container (7) has filled up, turn the
Juicer off and pour the juice into a suitable container,
place the juice container (7) under the juice spout (5).
•
Keep the juice container (8) full, turn off the juicer
and remove the juice from the container (8).
Note:
for your convenience, place an appropriately-
sized bag into the pulp container (10) to remove the
pulp together with the bag.
•
Once you finish using the Juicer, turn it off by setting
the power (6) to «0», and unplug it from the mains.
OVERHEATING PROTECTION
• Exceeding the operating temperature will trigger the
overheating protection and the Juicer will turn off.
•
Should the Juicer turn off on its own, set the power
(6) to «0» and unplug it from the mains.
• Depending on the room temperature, the electric
motor can take from 20 to 50 minutes to cool down,
Summary of Contents for BR1701
