BRAYER BR1606, Instruction Manual

Page: 12 / 56

12 EN
• Put the natural casing in a bowl with warm water for
10-15 minutes.
• Pull softened casing on the attachment (12) and
make a knot on the tip.
• Put the minced meat on the food tray (6).
• Insert the power plug into the mains socket.
• Switch the meat grinder on by setting the operation
mode switch (1) to the ON-position.
• Use the pusher (5) (pic. 11) to push down the minced
meat; as the casing is filled, slide it off the attachment
(12), and wet it as the casing dries.
• After the operation is finished, switch the meat
grinder off by setting the operation mode switch
(1) to the position «OFF», unplug the unit and then
disassemble it.
• Unscrew the nut (11), remove the attachments (12)
and (13) and remove the screw (8).
• To remove the meat grinder head (7), press the lock
button (3), turn the meat grinder head (7) clockwise
and remove it.
JUICE EXTRACTOR
• Use the juice extractor attachment to make juice,
such as blackcurrant, redcurrant, raspberry,
blackberry, cranberry, strawberry, peach, citrus, plum,
cherry, apple, pear, etc., you can make tomato puree
or vegetable juice.
• Prepare fruits or vegetables, wash them thoroughly,
remove inedible parts from fruits such as stems,
remove cherry or peach stones, cut fruits or
vegetables into strips or pieces that will easily fit into
the meat grinder head (7) feeding chute.
Assembling the juice extractor
• Place the plastic ring (17) in the juice extractor body
(14) (fig. 14).
• Insert the grid (24) into the juice extractor body (20)
(fig.17).
• Place the meat grinder head (7) in the slot (4) (fig. 4).
• Insert the juice extractor screw (19) into the meat
grinder head (7) (fig. 18).
• Put the nut (11) on the meat grinder head body (7)
(fig. 16).
• Align the tabs on the juice extractor body (20) with
the slots on the grinder head (7) and tighten the nut
(11) by turning it clockwise.
• Place the juice tray (20) on the juice extractor body
(14) at the desired angle (fig. 20).
• Screw the adjusting screw (15) a few turns into the
hole on the juice extractor body (14) by turning it
clockwise. Place the lid (16) on top (fig. 21).
• Note: - the degree of juice extraction depends on
the fruits or vegetables used and is adjusted by the
screw (21).
• Place a suitable container under the juice tray (26).
• Place a suitable container for extractions under the
juice extractor body (14) on the side of the adjusting
screw (15).