BRAYER BR1092, Instruction Manual

Page: 6 / 44

6 EN
it does not touch hot surfaces or sharp edges of
furniture.
• Do not touch the power cord and the power plug with
wet hands.Do not switch the thermopot on without
water, after the thermopot is filled, close the lid tightly.
• Ensure that the water level is not above the maximal
mark «FULL». If the water level exceeds the maximal
mark, boiling water can splash out of the thermopot
during boiling.
• To avoid burns by hot steam, do not bend over the
steam release openings in the thermopot lid. Do not
block the steam release openings with any objects.
• Do not open the thermopot lid while water boiling.
• Be careful while carrying the thermopot filled with
boiling water.
• Be very careful when pouring hot water out of the
thermopot.
• Unplug the thermopot before cleaning or when you
are not using it. When unplugging the thermopot hold
only the power cord plug and carefully remove it from
the mains socket, do not pull the power cord — this
can lead to damage of the power cord or the socket
or cause short circuit.
• To avoid electric shock do not immerse the thermopot
into water or any other liquids.
• Do not wash the thermopot in a dishwashing
machine.
• For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The thermopot is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the unit and the power
cord during the thermopot operation.
• Place the unit out of reach of children during the
operation and cooling down.
• This unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• Check the integrity of the power cord, the power plug
and the thermopot body periodically.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• If the power cord is damaged, it should be replaced
with a power cord received from the manufacture or
service.
• Transport the thermopot in the original package.
• Keep the unit out of reach of children and disabled
persons.