6
EN
•
Keep the unit out of reach of children and disabled
•
persons.
ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE KETTLE FOR
INDUSTRIAL OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
•
Unpack the kettle and remove all the packaging
materials.
•
Keep the original package.
•
Check the delivery set.
•
Read the safety measures and operating
recommendations.
•
Examine the kettle for damages, in case of damage
do not plug it into the mains.
•
Make sure that the specifications of power supply
voltage specified on the lower panel of the unit or
the base correspond to the specifications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
measures.
•
Wipe the outer surface of the flask (1) with a clean,
slightly damp cloth to remove dust.
•
Place the base (1) of the kettle on a solid steady
flat and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
•
Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures — this can lead to its breakage, cause
harm to the user or damage to his/her property.
•
Wash the kettle flask (1) with neutral detergents,
rinse and dry. Wipe the outer surface of the flask (1)
with a slightly damp cloth and then wipe it dry. Do not
use abrasives or coarse scourers for this.
•
Before connecting the kettle, make sure that there
are no moisture drops on the flask (1), the power
cord and the power plug.
•
Make sure that the kettle is switched off, the ON/OFF
button (5) is set to the position «0».
•
To fill the kettle with water, take it off the base (9),
press the lid (3) opening button (4).
•
Fill the kettle with water up to the mark «MAX» on the
water level scale (7).
•
Close the lid (3), make sure that the lid (3) is closed
tightly.
•
Set the kettle filled with water on the base (9).
•
Insert the power plug into the mains socket.
•
To switch the kettle on, set the ON/OFF button (5) to
the position «I», the illumination (8) of the kettle flask
will light up.
