7
EN
ATTENTION!
To avoid burns by hot steam, do not bend over the
spout (2).
•
Once water starts boiling, the kettle will be switched
off automatically and the illumination (8) of the flask
will go out. Pour out water and repeat the water
boiling procedure several times.
•
Hot water resulting from the first boilings is not
recommended to consume, you may use it for
domestic needs.
USING THE ELECTRIC KETTLE
•
Place the kettle on a solid steady flat and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
•
Ensure that the ON/OFF button (5) is always
accessible and is not blocked by foreign objects.
•
Make sure that the kettle is switched off, the ON/OFF
button (5) is set to the position «0».
•
To fill the kettle with water, take it off the base (9),
press the lid (3) opening button (4).
•
Fill the kettle with water not exceeding the maximal
mark «MAX» on the water level scale (7).
ATTENTION!
Handle the electric kettle with care, the glass flask
can break when hit against a solid object or dropped.
•
Close the lid (3) and put the full kettle on the base
(9).
•
Insert the power plug into the mains socket.
•
To switch the kettle on, set the ON/OFF button (5) to
the position «I», the illumination (8) of the kettle flask
will light up.
•
Once water starts boiling, the kettle will be switched
off automatically and the illumination (8) of the flask
will go out.
•
Before removing the kettle from the base (9), make
sure that the kettle is switched off, the ON/OFF
button (5) is in the position «0».
•
After switching the kettle off, wait for 15-20 seconds,
then you can switch it on again for re-boiling.
•
If you need to switch the kettle off, set the power
switch (5) to the position «0».
•
If you accidentally switched the kettle on, but the
water level appeared to be below the minimal mark,
the automatic thermal switch will be on and the kettle
will switch off.
•
Unplug the kettle and let it cool down for 10-15
minutes, then fill the kettle with water and switch it
on, the kettle will operate in normal mode.
CLEANING AND MAINTENANCE
•
Before cleaning unplug the kettle, pour out water and
let the kettle cool down.
•
Wipe the outer surface of the flask (1) with a slightly
damp cloth and then wipe the flask (1) dry. Use soft
