SERIES 762 BIDIRECTIONAL SLURRY KNIFE GATE VALVES
Installation, Operation, and Maintenance Manual
23 of 30
© 2021 BRAY INTERNATIONAL, INC. ALL RIGHTS RESERVED. BRAY.COM The Information
contained herein shall not be copied, transferred, conveyed, or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International, Inc.
14.0 FIELD ADJUSTMENTS
WARNING
Verify line is depressurized before installing, removing, or
repairing a valve or operator.
Do not pressurize the line without an operator on the valve.
14.1
REPLACEMENT OF PARTS AND MODIFICATIONS
14.1.1
Parts listed in
Table 5
below may wear out and require
replacement during the normal life of the valve; they may be
replaced on-site by the user with spare parts supplied by Bray.
TABLE 5:
REPLACEMENT PARTS
PART #
DESCRIPTION
MATERIAL
QTY PER
VALVE
RECOMMENDED REPLACEMENT
QTY
2
Seat
See name plate
2
One or both as required
based on inspection
3
Gate
See name plate
1
One
4
Secondary Seal
EPDM
1
Complete set
17
Seat Retainer
See name plate
2
One or both as required
based on inspection
(continued)
