Bray/VAAS O-Ported Series Operation And Maintenance Manual Download Page 3

1

O-Ported Series

Operation and Maintenance Manual

Definition of Terms - Safety Instructions

READ AND FOLLOW THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DEFINITION OF TERMS

Indicates a potentially hazardous situation which, if not avoided, could result in death or 
serious injury 

Indicates a potentially hazardous situation which, if not avoided, may result in minor or 
moderate injury 

NOTICE

Used without the safety alert symbol indicates a potential situation which, if not avoided, 
may result in an undesirable result or state, including property damage 

HAZARD-FREE USE

This device left the factory in proper condition to be safely installed and operated in a hazard-free manner  The notes and 
warnings in this document must be observed by the user if this safe condition is to be maintained and hazard-free opera-
tion of the device assured 

Take all necessary precautions to prevent damage to the valve due to rough handling, impact, or improper storage  Do not 
use abrasive compounds to clean the valve, or scrape metal surfaces with any objects 

The control systems in which the valve is installed must have proper safeguards to prevent injury to personnel, or damage to 
equipment, should failure of system components occur 

QUALIFIED PERSONNEL

•  A qualified person in terms of this document is one who is familiar with the installation, commissioning, and operation 

of the device and who has appropriate qualifications, such as:

•  Is trained in the operation and maintenance of electrical equipment and systems in accordance with established safety 

practices

•  Is trained or authorized to energize, de-energize, ground, tag, and lock electrical circuits and equipment in accordance 

with established safety practices

•  Is trained in the proper use and care of personal protective equipment (PPE) in accordance with established safety 

practices

•  Is trained in first aid 

•  In cases where the device is installed in a potentially explosive (hazardous) location – is trained in the commissioning, 

operation, and maintenance of equipment in hazardous locations

Summary of Contents for O-Ported Series











Reviews: