16
Assembly Instructions
For assistance with your assembly call:
www.bravosportscorp.com
or Visit
Toll
Free
Carefully
reposition the
rubber boots
so they cover
which has been
repositioned).
by carefully
sliding the rubber boots so they cover the bolts and
nuts (the boots should look like the boot on the
right side of the linkage in this image >>>>>>>>>
the bolts and
nuts (refer to
boot on right,
by removing the bolts & nuts from each steering arm. Then place the
Steering Linkage over the Steering Rod so the “Loop” on the linkage captures the end of the Steering Rod.
Secure the Linkage Arm by replacing the bolts & nuts.
The “Loop”
STEP 15. ATTACH STEERING LINKAGE
Remove
Bolt and Nut
Remove
Bolt and Nut
Example of
a properly
repositioned
rubber boot
STEP 16. FIT THE RUBBER BOOTS
***PLEASE NOTE - STEPS 1 THRU 17
WILL BE PERFORMED WITH THE
TRUCK UPSIDE-DOWN***
Summary of Contents for GRAVE DIGGER BAD TO THE BONE
Page 5: ...For assistance with your assembly call www bravosportscorp com or Visit Toll Free 4 ...
Page 26: ...25 For assistance with your assembly call www bravosportscorp com or Visit Toll Free ...
Page 32: ...31 For assistance with your assembly call www bravosportscorp com or Visit Toll Free ...