BRAVILOR BONAMAT Bolero 1 Operator'S Manual Download Page 12

Page: 12 / 114

3.4 Screensaver

3.3a

If the screen has not been touched for a certain time, the screensaver starts.

The screensaver timer can be set in §5.3.5 on p.70

•

touch anywhere on the screen to return to the beverage

selection screen

3.5 Energy

saving

mode

(ECO)

The device is equipped with an energy saving mode (ECO) this is used to save energy

consumption when the machine is not used (e.g. overnight or during a weekend).

When energy‑saving mode becomes active, the following actions are performed:

•

water level control

disabled

•

boiler heating

disabled

•

backlight display

set to low percentage.

•

fan

disabled

3.4a

The energy control consist out of a (customised) screensaver

with a symbol as semi transparent overlay.

The energy‑saving mode has priority over the screensaver.

•

touch anywhere on the screen to return to the beverage

selection screen

►

Depending on the switch−off time, it can take a few minutes

before the machine is ready for use again.

Summary of Contents for Bolero 1



















































































































Search results

Summary of Contents for Bolero 1

Reviews:

Related manuals for Bolero 1

Brands by name

Popular brands

BRAVILOR BONAMAT Bolero 1, Operator'S Manual

Search results

Summary of Contents for Bolero 1

Reviews:

Related manuals for Bolero 1

Brands by name

Popular brands