6
Full manual and troubleshooting: braven.com/manuals
WARNINGS, CAUTIONS & LEGAL INFORMATION
To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be
exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being charged
or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause
a failure and/or a fire hazard. The power supply must be used indoors only. Make no modifications to the product or accessories.
Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not
place any flame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains small parts that may be a choking
hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the
specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or
leakage, properly dispose of the battery. Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-
40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash
the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive
heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess
of 115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this
manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage
the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose
them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed,
properly dispose of it. Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock,
avoid overloading wall outlets, extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music
player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. The
A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual
for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
Summary of Contents for BRV-1M
Page 1: ...QUICK START GUIDE ...
