Moving & Towing to Job Site
11
5. Attach safety
chains
Attach safety chains.
1.
Two safety chains must be used while towing.
2.
Cross safety chains under the coupler allowing only enough slack for vehicle turns.
6. Tow to desired
location
Tow log splitter carefully to desired work site.
(See “Before Each Use” section on selecting an appropriate work site.)
Important safety instructions
:
Speed limit
. Never tow this log splitter over 45 mph. Faster speeds may result in
loss of control.
Added length
. Be aware of the added length of the splitter.
Rough terrain
. Drive slowly and take extra caution when traveling over rough
terrain.
On public roads
. If towing on a public road, make sure to comply with all local,
state, and federal towing requirements. It is the sole responsibility of the
purchaser to obtain licensing, trailer lights, safety chains or signage, as needed to
comply.
Unattended
. Turn off the towing vehicle before leaving the splitter unattended.
Under the influence
. Never tow or operate this splitter while under the influence
of alcohol, drugs, or medication.
7. Lock leg down &
unhitch
Lock tow bar leg in the DOWN position and unhitch from vehicle.
NEVER operate log splitter while it is attached to the vehicle
.
