Brave BRP500TP2 Owner'S Manual Download Page 1

Page: 1 / 14

Owner’s Manual

Brave Water Pump

WARNING

Read and understand all instructions.

Failure to follow all instructions may result in serious injury or property damage.

WARNING

: Wear appropriate protective gear. This list includes, but is not limited to:

-safety glasses, protective boots with slip resistant soles, gloves, hearing protection.

•

WARNING

: Keep guards in place and in working order. Never operate the product without the guards in place.

•

WARNING

: LETHAL EXHAUST GAS! An internal combustion engine discharges carbon monoxide, which is a

poisonous and odorless invisible gas. Death or serious illness may result if inhaled. Operate only in an area with

good ventilation.

•

DANGER

: Do not smoke when refueling.

•

WARNING

: Do not use pump in explosive atmosphere.

•

WARNING

: Do not pump volatile or flammable liquids such as gasoline, fuel oil, kerosene, etc.

•

CAUTION

: Do not attempt to operate pump, if any parts are missing or damaged.

•

CAUTION

: For proper handling techniques and cautions when pumping certain chemicals, contact your chemical

supplier or local agencies (fire dept etc)

•

CAUTION

: The engine is hot enough to cause injury, do not touch the exterior of the engine, especially the muffler

and surrounding area.

•

WARNING

: Even though this unit will operate with minimal supervision, it should not be left operating by itself.

Depending on the application and area unit is operating (high traffic, people in area, etc.) will dictate the necessity

of having someone watching over the unit.

•

CAUTION

: Do not allow pump to be located in freezing or colder weather. Damage to pump will result.

•

CAUTION

: Do not run pump dry, as permanent damage to the mechanical seal will result.

STOP!

ADD OIL TO ENGINE BEFORE USING: Engine is shipped without oil. DO NOT start engine without first adding oil.

INSPECT COMPONENTS: Closely inspect to make sure no components are missing or damaged.

Any Questions, Comments, Problems or Parts Orders

Call Brave Support 1-800-350-8739

ITEM NUMBER(S): BRP500TP2, BRP520TP3, BRP650HP2

MANUAL SERIAL TAG HERE

MBRP500TP2

Summary of Contents for BRP500TP2















Search results

Summary of Contents for BRP500TP2

Reviews:

Related manuals for BRP500TP2

Brands by name

Popular brands

Brave BRP500TP2, Owner'S Manual

Search results

Summary of Contents for BRP500TP2

Reviews:

Related manuals for BRP500TP2

Brands by name

Popular brands