Brava Cube1, Manual

Page: 46 / 73

Press the top edge of the back cover against
the top edge of the phone body, and then
screw it on.
Battery charging
Connect a compatible charger to a power
outlet, and then connect the end of the
microUSB connector cable to the connector
on the bottom of the phone that is protected
by the cap. After a few moments, the phone
starts to indicate that the battery is being
charged.
When switched on, charging is visible in the
top display bar.
It may take up to four hours to charge a fully
discharged phone, depending on whether it
is in use or not. When charging, the back of
the phone becomes warm
- this is normal.