background image

Page 45

WARRANTY COVERAGE AND WARRANTY COVERAGE TIME PERIODS

The BraunAbility

®

 (“Braun”) warranty covers certain parts of this wheelchair lift for three (3) years or 10,000 

cycles and the cost of labor to repair or replace those parts for one (1) year or 3,000 cycles.  If The Braun 

Corporation receives the warranty registration card within 20 days after the lift is put into service, the war-

ranty labor coverage will increase from one (1) year or 3,000 cycles to three (3) years or 10,000 cycles.  In 

addition, providing the warranty registration card is returned as noted above, the following lift’s power train 

parts are warrantied for five (5) years or 15,000 cycles:  Cable, Cylinder, Flow Control, Gear Box, Mo

-

tor, Pump, Hydraulic Hose and Fittings.  This limited warranty covers substantial defects in materials and 

workmanship of the lift, provided that the lift is operated and maintained properly and in conformity with 

the owner’s manual.  The warranty period begins on the date that the product is delivered to the first retail 

purchaser by an independent, authorized dealer of Braun, or, if the dealer places the product into any type 

of service prior to retail sale, on the date the dealer first places the product in such service.  This limited 

warranty applies only to the first purchaser.  It may not be transferred.

WHAT BRAUN WILL DO TO CORRECT PROBLEMS

In the event that a substantial defect in material or workmanship, attributable to Braun, is found to exist 

during the first year of warranty coverage, it will be repaired or replaced, at Braun’s option, without charge 

for parts or labor to the owner, in accordance with the terms, conditions and limitations of this limited war-

ranty.  If the substantial defect in material or workmanship, attributable to Braun, is found to exist during the 

second or third year of warranty coverage, it will be repaired or replaced, at Braun’s option, without charge 

to the owner for parts, only, in accordance with the terms, conditions and limitations of this limited warranty.  

Providing the warranty card is returned within 20 days as outlined above, the labor warranty period will be 

extended by two years of coverage in accordance with the terms, conditions, and limitations of this limited 

warranty.  In addition, if a substantial defect in material or workmanship, attributable to Braun, is found 

to exist during the fourth or fifth year of warranty coverage to the following lift’s power train parts: Cable, 

Cylinder, Flow Control, Gear Box, Motor, Pump, Hydraulic Hose and Fittings, it will be repaired or replaced, 

at Braun’s option, without charge to the owner for parts, only, in accordance with the terms, conditions and 

limitations of this limited warranty.  The cost of labor for repair or replacement at any time after the warranty 

coverage detailed above is the sole responsibility of the owner.

Braun’s obligation to repair or replace defective materials or workmanship is the sole obligation of Braun 

under this limited warranty. Braun reserves the right to use new or remanufactured parts of similar quality 

to complete any work, and to make parts and design changes from time to time without notice to anyone.  

Braun reserves the right to make changes in the design or material of its products without incurring any 

obligation to incorporate such changes in any previously manufactured product.  Braun makes no warranty 

as to the future performance of this product, and this limited warranty is not intended to extend to the future 

performance of the product.  In addition, the owner’s obligation to notify Braun, or one of its authorized, 

independent dealers, of a claimed defect does not modify any obligation placed on the owner to contact 

Braun directly when attempting to pursue remedies under state or federal law.

LIMITATIONS, EXCLUSIONS AND DISCLAIMER OF IMPLIED WARRANTIES

ANY IMPLIED WARRANTY THAT IS FOUND TO ARISE BY WAY OF STATE OR FEDERAL LAW, IN-

CLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF 

FITNESS, IS LIMITED IN DURATION TO THE TERMS OF THIS LIMITED WARRANTY AND IS LIMITED 

IN SCOPE OF COVERAGE TO THE SCOPE OF COVERAGE OF THIS LIMITED WARRANTY.

  Braun 

disclaims any express or implied warranty, including any implied warranty of fitness or merchantability, on 

items excluded from coverage as set forth in this limited warranty.  Braun makes no warranty of any nature 

beyond that contained in this limited warranty.  No one has authority to enlarge, amend or modify this limited 

warranty, and Braun does not authorize anyone to create any other obligation for it regarding this product.  

Braun is not responsible for any representation, promise or warranty made by any independent dealer or 

other person beyond what is expressly stated in this limited warranty.  Any selling or servicing dealer is not 

Braun’s agent, but an independent entity.

BraunAbility

®

 Limited Warranty

Summary of Contents for Millennium 2 NL Series



















































Reviews: