7
•
Small parts may come off, keep out of reach of
children.
To avoid brush head breakage which may generate
a small parts choking hazard or damage teeth:
•
Prior to each use, ensure the brush head fits
well. Discontinue use of the toothbrush, if brush
head no longer fit properly. Never use without a
brush head.
•
If the toothbrush handle is dropped, the brush
head should be replaced before the next use
even if no damage is visible
•
Replace brush head every 3 months or sooner
if brush head becomes worn.
•
Clean brush head properly after each use
(see «Cleaning recommendations» paragraph).
Proper cleaning ensures the safe use and
functional life of the toothbrush.
Important Information
•
This toothbrush, charger and pouch
(accessory) contain NdFeB magnets and
generate magnetic fields. If you use a medical
device or have an implanted medical device,
consult with the medical device manufacturer or
a physician, if you have questions about safely
using your Oral-B iO toothbrush.
•
Your Oral-B toothbrush can be used with your
smartphone (find details under «Connecting
your toothbrush to your Smartphone»).
To avoid electromagnetic interference and/or
compatibility conflicts, disable
Bluetooth
®
on
your toothbrush handle (5) before using it in
restricted surroundings, such as aircrafts or
specially marked areas in hospitals.
•
Disable
Bluetooth
by entering the «Settings»
menu on the interactive display (4)
->
Bluetooth
-> disable. Follow the same
procedure to enable
Bluetooth
again.
•
Persons with pacemakers should always keep
the toothbrush more than 15 centimeters (six
inches) from the pacemaker while turned on.
Anytime you suspect interference is taking
place disable
Bluetooth
.
Specifications
For voltage specifications refer to the bottom of the
charging unit.
Noise level: 62 dB (A)
First use
Please wake up your toothbrush by pressing the
on/off button (7) and follow the instructions on the
interactive display (4) to get started for first time
setup.
If not further instructed on the display, you may
toggle with the mode button (8) and select with the
on/off button (7).
You may change the settings via the «Settings»
menu (17) at any time.
Charging and Operating
•
To charge the battery place the toothbrush on
the plugged-in charger (6).
•
The charge level is indicated on the interactive
display (4). Once it is fully charged the display
turns off. A full charge typically takes 3 hours.
•
If the battery is running low the motor reduces
its speed and the Smart Pressure Sensor (3)
shortly blinks in red. Once the battery is empty,
the motor stops; it will need at least a 5-minute
charge for one usage.
Note: In case the battery is empty (display off),
charge for at least 30 minutes.
•
You can always store the handle on the
plugged-in charger to maintain it at full charge;
a battery overcharge is prevented by the device.
Note: Store handle at room temperature for optimal
battery maintenance.
Caution:
Do not expose handle to temperatures
higher than 50 °C / 122 °F.
Using your toothbrush
Start Brushing
Place the brush head on the handle. A small gap
should remain between handle and brush head. Lift
the handle off the plugged-in charger or simply
pick it up to wake up the handle (display turns on).
Wet brush head and apply toothpaste. To avoid
splashing, guide the brush head to your teeth
before switching the handle on by pressing the
on/off button.
Note: Display turns off after some time. You may
press the on/off button to activate display again.
Guide the brush head from tooth to tooth. Brush
the outsides, the insides and the chewing surfaces.
Brush all four quadrants of your mouth equally. You
may also consult your dentist or dental hygienist
about the right technique for you.
After Brushing, the display gives you feedback
based on your brushing time.
In the first days of using any electric toothbrush,
your gums may bleed slightly. In general, bleeding
91451390_OP020_CEUAIL.indd 7
91451390_OP020_CEUAIL.indd 7
31.08.20 08:27
31.08.20 08:27
