Page 11
.6,)"0UMP-ODULE
0ARTS,IST
Item Qty.
Description
Part
No.
1
Pump Module (complete), 12 Volt, Rear
985-A2516RNA
1
1
Pump Assembly (M268-0112) 12V-120G - Duel Relief (Includes Items 2 & 3)
30915-12V
2
1
Power Cable, Up Solenoid to Motor
29049
3
1
Solenoid, Up - 4-Post - Trombetta (Flat Mount)
31374
4
1
Diode Assembly, Up Solenoid
73906A
5
2
Nut, #10-32 Serrated Flange
83080
6
1
Fitting, Male 7/16-20 O-Ring to Male 7/16-20 JIC 37°
24504
7
1
Elbow, Female Swivel 7/16-20 JIC 37° to (2) Male 7/16-20 JIC 37°
26579
8
1
Control, Hand Pendant Assembly - Standard (Includes Items 9-17)
100063-001
9
1
Keypad, Hand Control
30000
10
1
Hand Pendant Case - Front
100027-001
11
1
Seal, Hand Control - Standard
100066-001
12
1
Module, Hand Control
100041-001
13
1
Screw, 10-32 x 1/2”, Phillip, Pan Head
82744
14
1
Hand Pendant Case - Rear
100028-001
15
1
Hanger, Round - Hand Control
73793
16
2
Screw, #4-40 x 1/4”, Phillip, Pan Head
11480
17
1
Cord, Coiled - 6-Conductor
100044-001
18
1
Strain Relief - Liquid Tight
30753
19
1
Control
Board
Assembly
100159-001
20
8
Standoff, Snap-In (2 shown)
31011
21
1
Switch, Push Button
31753
22
1
Diode, Green LED, Panel Mount
29545
23
1
Stud, Power Feed
26084
24
1
Rubber Boot, Red
t
See note below
82046
25
1
Cover, Pump, 2-Piece - Back (Complete Assembly 915-0513RNA Includes Items 25 - 32) 915-0513RN
26
1
Recepticle, Clip On
28803
27
1
Lens, Threshold Warning - Red
30704
28
1
Decal, Warning / Pressure Relief Valve (Not shown - see Decal Section)
22249
29
1
Spacer, Lens - NHTSA
31386
30
1
Metal Ring Base - Lamp
30971
31
1
Socket,
Lamp
30703
32
3
Screw, #8-32 x 1/2” Pan Head Phillips - Thread Cut
30974
33
1
Bulb, Light
19841
34
1
Switch,
Toggle
12185
35
1
Decal, Lift Power - On/Off (Not shown - see Decal Section)
21494
36
2
Washer, 5/16” Flat
10063
37
2
Bolt, 5/16-18 x 3/4”, Nylock, Hex * See note below
29608
38
2
Bolt, 5/16-18 x 1/2”, Nylock, Hex * See note below
10012
39
1
Cable, Ground
22166A
40
1
Washer, 5/16” External Tooth
16368
41
1
Beeper,
Continuous
30487
42
1
Wire Assembly, Lift Interlock Connection
31797A
43
1
Wire Assembly, Lift Stowed Connection
31798A
44
1
Plate, Backing / Mounting - Rear
985-2501RN
45
1
Pump Handle with Grip
17206A
46
1
Clamp, Hose - Solenoid Mounting
29663
47
1
Solenoid, Up - 4-Post - Prestolite
28308
48
1
Cover, Pump - 2-Piece - Top / Front (Complete Assembly 985-0519RNA Includes Items 48 - 59) 915-0519RN
49
1
Stud, Wing Head - 1/4 Turn
28804
50
1
Retainer, Push On
28805
51
1
Plug, Window - Clear
30443
52
1
Clip, Pump Handle - Top
915-5517
53
1
Washer, Nylon, 1/4” I.D. x 11/16” O.D. x .030”
12690
54
1
Clip, Pump Handle - Bottom
915-5518
55
3
Rivet, Pop, SD43BS - 1/8” - .13”/.19”
12954
56
1
Decal, Removal / Installation Pump Handle (Not shown - see Decal Section)
29052
57
1
Decal, Manual Instructions - Public
(Not shown - see Decal Section)
31412
58
1
Decal, Removal / Installaton - Pump Cover
(Not shown - see Decal Section)
29051
59
1
Decal, Warning - Control Board Damage - ESD
(Not shown - see Decal Section)
30787
60
1
Cable, Pump Module Power Hookup (Not shown - see Wiring Diagram)
26082A-4
61
1
Harness, Power (Not shown - see Wiring Diagram)
985-A2530NA
62
1
Harness, Interlock / Lighting (Not shown - see Wiring Diagram)
985-0531NA
63
1
Harness, Up / Down Solenoid (Not shown - see Wiring Diagram)
985-2533NA
64
1
Harness, Extension - Threshold Switch (Not shown - see Wiring Diagram)
985-A1534NA
65
1
Harness, Jumper (Not shown - see Wiring Diagram)
985-2541NA
* Apply red #271 Thread Locker Loctite
®
to the four hex bolts (items 37 and 38) if a blue nylon patch is not present on
the bolts when retro
fi
tting an M268-0112 pump assembly. Loctite
®
is available from The Braun Corporation under part
number 11522.
t
Indicates items available for replacement part purposes
only
. These items
are not
included with replacement pump
modules.
