Braun Multipress MP 80, Use Instructions

Page: 6 / 57

Caution
●
Read all instructions carefully before
using this product.
●
This product is suitable for normal household
use only and not for commercial use.
● Keep out of children’s reach.
●
Do not reach into the filling shaft while the
motor is running. Always use the pusher to
guide food through the shaft.
● Remove plug from socket before assembling
or disassembling appliance.
● Braun electric appliances meet applicable
safety standards. Repairs or the replacement
of the mains cord must only be done by
authorised service personnel. Faulty,
unqualified repair work may cause
considerable hazards to the user.
Specifications
● Voltage/wattage: See typeplate on the
bottom of the appliance.
● Safety system: The appliance can only be
switched on when the cover has been fully
locked into position and can only be opened
when the switch has been turned off.
● Motor stop: The motor will stop completely
within 2 seconds of switching the appliance
off.
Safety fuse
If the appliance is overloaded the safety fuse
will cut out. To restart the appliance:
●
Turn the switch
2
off = «0» (important!).
● Unlock and remove the cover
7
.
●
Clean the juice ring
5
, filter
6
and cover
7
.
● Allow the appliance to cool down approx.
20 minutes.
● Assemble the juicer again.
●
Turn the switch
2
on = «l».
●
If the appliance still does not run, allow it
to cool down again.
Description
1
Motor part
2
On/off switch
3
Unlocking buttons
4
Pulp container
5
Juice ring
6
Filter
7
Cover
8
Filling shaft
9
Filling tray
j
Pusher
q
Juice spout
l
Juice container with foam separator
m
Cord storage
Before using for the first time, wash the juicer
parts (see «Disassembling» and «Cleaning»).
Assembling
1. Put the juice ring
5
on the motor part
1
(fits loosely without engaging).
2. Lay the filter
6
into the juice ring
5
.
3. Put the cover
7
on and push down firmly
with both hands until you hear it snap into
place.
4. Hang the pulp container
4
onto the hinges
(the top one first); then close it and be sure it
snaps into place.
5. Put the juice container
l
underneath the
juice spout
q
(A). Capacity: 500 ml. The juice
container comes with a foam separator to
ensure clear foam free juice.
If it is not required simply remove it from the
juice container. You can, of course, place a
glass or other container underneath the juice
spout to collect the juice.
6. For easier filling, put the filling tray
9
on top
of the filling shaft
8
(A).
Preparing fruit or vegetables
Important: Use only well ripened fruits, other-
wise the filter
6
may be clogged up which
would result in repeated cleaning of the filter.
Wash or peel the fruit or vegetables you want
to process. Fruit with large pips or stones
should always have these removed first. Pro-
cess seed fruit (such as apples, pears) with
peels and cores. Fruit and vegetables with thick
peels (e. g. citrus fruits, melons, kiwis, beets)
must be peeled first. For grapes, cut off the
main stem. For leaf vegetables (e. g. cabbage
and spinach) and herbs, roll up leaves together
tightly. Cut fruit and vegetables into pieces
large enough to fit into the filling shaft.
Currants and rhubarb are not suitable for
making juice in the Braun Multipress.
Extracting juice
● Put fruit or vegetables into the filling shaft
8
.
Turn the switch
2
on = «I» and press lightly
with the pusher
j
(A). Add further fruits or
vegetables while the motor is running.
● The amount of juice you extract depends on
the nature of the fruits and vegetables. When
6
English
4290379_P4-62 Seite 6 Mittwoch, 5. Juli 2006 11:24 11