11
line to the shaver foil and the metal
parts of the long hair trimmer. Then
remove the shaver head and also apply
a tiny amount of vaseline as shown in
picture section (E).
• The shaver foil and the cutter block
are precision parts that wear out with
time. To maintain optimum shaving
performance, replace your foil and
cutter block when you notice a reduced
shaving performance.
• Do not shave with a damaged foil or
cord.
• How to replace the shaving parts
Shaver foil: Press the release buttons
to remove the shaver head. To
remove the shaver foil, press the blue
plastic frame (F). To mount a new one,
insert it from inside the shaver head.
Cutter block: To remove the cutter
block, press and turn it 90° (G1), then
take it off. To put on a new cutter block,
press it onto the cutter block holder
and turn 90° (G2).
Preserving the rechargeable batteries
In order to maintain the optimum capacity
of the rechargeable batteries, the shaver
has to be fully discharged (by shaving)
approximately every 6 months. Then
recharge the shaver to full capacity. Do
not expose the shaver to temperatures
higher than 50 °C for extended periods
of time.
Environmental notice
This appliance is provided with nickel-
hydride rechargeable batteries. To protect
the environment, do not dispose of this
appliance in the household waste at the
end of its useful life. Disposal can take
place at a Braun Service Centre or
appropriate collection sites.
However, if you prefer to dispose of the
appliance yourself, refer to the section
«Battery removal».
Subject to change without notice.
This product conforms to the
EMC-Directive 89/336/EEC and
to the Low Voltage Regulation
(73/23 EEC).
Electric specifications see printing on the
special cord set.
4
Ladystyle_ LS5500_MN_P6-88 Seite 11 Mittwoch, 7. Juli 2004 8:26 08
