Braun DigiFrame 1360, Instruction Manual

Page: 16 / 86

E N G L I S H 1 4
3. Getting Started
3.1
Plug one end of the included AC adapter into a
standard 110-240V AC electrical outlet and the
other end into DC in of the photo frame.
3.2
Remove the protective film covering the LCD.
3.3 Remove the plastic battery insulator from the
battery compartment and make sure that the
remote control has a battery inserted. Please
refer to “Installing & Replacing the Battery” if
you need a new battery.
3.4
Power on the unit by pressing the Power but-
ton on the remote control.
4. Operating Instructions
After turning the unit on it will show the start-up
picture.
4.1
Main Menu
After showing the start-up picture, it will automati-
cally enter the main menu.
USB and Memory Card
The unit supports SD/MMC/MS and USB 2.0. Press
Enter to select the source device.
Note:
1) Make sure there are supported picture, music
and video files on the card or USB device.
2) You can also select Auto-play Photo, Music,
Movie or Photo + Movie in the
Common
menu.
5. Picture Mode
Highlight Photo from the main menu or press the
PHOTO button on the remote control to display the
photos stored on the USB drive or SD card. Press
the
EXIT
button on the remote control to display the
photo file list of the memory device.
Press
to highlight and select the photo to
be displayed and press ENTER to display the photo.
Press the EXIT button on the remote control to
display the memory device menu. Press to
highlight and select the memory device (card/USB)
and press
ENTER
to display the photos stored on
this device.
= Common
= Time, Clock
= Play, Setup
= System
BN_DF1360_GB_0814.qxd 28.08.2014 15:07 Uhr Seite 4