Page 29
Installation Instructions
21
Reconnect and Secure OEM Harnesses
C
onnect the seat belt receptacle harness
plug to the mating plug on the OEM seat
harness as shown. Connect the OEM seat
harness (yellow and green plugs) to the
mating OEM plugs from the floor mounted
OEM harness (extended harness).
S
ecure the seat harness to the seat bottom
as shown using cable ties. Be sure the
harnesses are secured loosely enough to
eliminate component strain.
21b
21a
22
Test Seat Operation
C
arefully operate the Companion Seat
through all cycles following the operating
instructions contained in this manual and
posted on Warnings and Seat Operating
Instructions decal 22616.
K
eep all OEM hardware for possible use in
the future.
22
T
he extension harness must be secured to
the Companion Seat as shown. Cycle the
Companion Seat through the seat rotation
and the stow/deploy cycles to determine
the proper mounting length for the harness.
The cable should not be strained during
any part of the operation of the Companion
Seat. Use a plastic clip for securement.
Drill a 13/64" mounting hole in the Com-
panion Seat plastic shroud for the clip. Use
the pop rivet with a backing washer to
secure the clip and harness to the shroud.
Seat Belt
Receptacle Harness
OEM Seat Harness
(Extended)
OEM Seat Harness
(Extended)
Plastic Cable Clip
Cable Ties
