Menu selection
Part 1 • Page 13-1
Part 1 – Operating Instructions
Rev. 6.4 dated 2022-02
Software Released Version: 1
(Eco)RO Dia II
Part 1 • Ch
apter 13
13. Menu selection
13.1 Specifications, menu item 1
1 Specifications
2 Prm dialysis mode
3 Auto on/off
4 Prm standby mode
5 DI data
6 Cleaning data
7 RO start options
8 Passwords
9 Date / time
10 Choose system
11 Op. hours meter
12 Hot RO
13 Service mode
14 Reserve
15 Fault history
<<
ENTER
When >Menu< is selected, the key data shown are listed.
Certain program items have a separate method for display and input.
This is shown by selecting the respective menu sub-item as follows:
A) Display
and
B) Entry
When >Display< is selected, the set key data of the sub-menu can be
queried.
When >Entry< is selected, you will requested to enter an access code.
Permitted codes are:
Password 1 (factory setting = 2232)
Password 2 (xxxx customer-specific)
The parameters of the respective sub-menu can be changed here.
The code is set digit by digit by using function keys >+< and >–< and is
confirmed by pressing >Enter<.
Parameters that are related to the system's functional safety and
parameters used by technical service personnel for checking system
functions are password-protected and may only be changed by authorized
personnel.
Cond. permeate
Water temperature
Operating press. RO
Flow rate
Yield
Ov. quant. of water
Ov. quant. of water
Current flow
CD raw water
<<
ENTER
The most important process parameters can be viewed in this menu item.
The corresponding information is shown on the display by selecting the
respective parameter using the arrow keys >
< and >
< and then
confirming selection by pressing the OK function key.
Selecting the menu item
<< Switches to the previous menu
Changed data are transferred!
Cursor up/ Change values
Cursor down/ Change values
OK Activate selection
Cond. permeate:
Displays the conductivity of the permeate in the feed pipe to the ring
piping
Water temperature:
Displays the temperature in the feed pipe to the supply tank (TISAH1)
Operating press. RO:
(Option with
Aquaboss
®
Vision)
System pressure indication:
PI2 (concentrate, 1st stage): in bar
PI3 (permeate, 1st stage): in bar
PI4 (concentrate, 2nd stage): in bar
