Braun AESCULAP ACCULAN GA 620 D, Instructions For Use/Technical Description

Page: 15 / 104

13
ACCULAN drill GA 620 D
1. Overview
The ready-to-use drill consists of a tool adapter 3, 6 or 8 and a three-
jaw chuck 9 to 11 or the Kirschner wire chuck 12 or 14 , the drill 16
and a battery 25 and cover 23 .
1 Aesculap square connection
2 Tool release sleeve
3 Tool adapter for tools with square connection GB 411 R
4 Adapter release
5 Sleeve AO connection
6 Tool adapter for tools with AO connection GB 412 R
7 Aesculap hexagonal connection
8 Tool adapter for tools with hexagonal connection GB 413 R
9 Small three-jaw chuck GB 415 R (0–4 mm)
10 Large three-jaw chuck GB 416 R (0.5–6.5 mm)
11 Keyless three-jaw chuck GB 418 R (0.8–6 mm)
12 Spike chuck GB 437 R
13 Clamp lever
14 Kirschner wire chuck GB 439 R
15 Driven shaft
16 ACCULAN drill GA 620 D
17 Rear motor shaft
18 Screw cap with hexagon
19 Change of direction of rotation – trigger for left-handed rotation
20 Trigger for speed control
21 Trigger lock
22 Locking pin
23 Cover GA 624
24 Cover release
25 Battery GA 626
26 Funnel GA 625
27 Charging side
28 Safety sleeve GA 437 224
NOTE
¾
The drill GA 620 D must be operated only with original
Aesculap accessories.
Explanation of symbols
Contents
1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. Mode of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. Putting into operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1 Inserting the battery (Fig. 1-3) . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 Removing the battery (Fig. 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3 Connection of the tool chuck to the drill . . . . . . . . . . . . . . . . . 16
5.4 Connection of the tools to the tool chuck. . . . . . . . . . . . . . . . . 18
6. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. Function test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8. Care and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.1 Manual preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.2 Mechanical preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10. Troubleshooting list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
11. Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
13. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
14. Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
15. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Attention, see Instructions for use
Classification type B
CE marking according to Directive 93/42/EEC
Right/Left switch
• Upper trigger not depressed (R):
machine set for right-handed rotation (R)
• Upper trigger fully depressed (L):
machine set for left-handed rotation (L)
Speed control
• Lower trigger not depressed (O):
machine not operating (O)
• The speed increases as the lower trigger is
depressed to an increasing extent
• Lower trigger fully depressed (I):
machine runs at maximum speed (I)
Marking of electric and electronic devices according
to directive 2002/96/EC (WEEE), see Disposal.