Braun 57609, User Manual

Page: 18 / 41

cover the earlier recorded images; when Close is selected, the default is: the recorder will
vide by 10 minutes, and not record when the card is full;
b. What recorded by front and rear cameras are saved in VIDEO folder of TF card.
c. Photo files will be saved in PHOTO folder of TF card.
3. Use of manual record function
Long press
【
Power
】
of recorder for 3 seconds, the recorder will be enabled and start
automatic recording, and the video indicator lamp will be on and flicker. Long press
【
Power
】
for 3seconds again to close this machine, and the recorder will automatically
keep the record and close down.
4. Use of camera function
In On state, short press
【
Mode
】
to enter into camera mode, and the icon on the upper
left corner is changed to camera from vidicon; and short press
【
Confirm
】
to take a
picture. Short press
【
Mode
】
to switch back to video mode.
5. Use of motion detection function
In standby mode, long press
【
Up
】
to enter into motion detection mode. When a moving
object is sensed by lens, this machine will enter into camera state; when the lens fails to
sense the object movement, the system will stop video 5 seconds later. When it is needed
to quit the motion detection mode, long press
【
Up
】
for 3 seconds when no video is
conducted, to exit.
6. Collision response function
This machine is built with G-sensor. In case of serious vehicle collision, the recorder will
lock the image under recording upon occurrence of accident and save it as a special image,
and also the Lock icon will be displayed on the top of display screen. The locked image will
not be covered cyclically.
【
Prompt
】
a. The locked video file is provided with SOS sign in its name, while ordinary record files are
not provided with such sign.
b. G-sensor supports sensitivity control, and its settings may be changed in the setup menu