Troubleshooting Guide
PROBLEM
POSSIBLE CAUSES
SOLUTION
Water droplets drip on the
fabric during ironing.
The water tank lid is not properly
closed.
Press the water tank lid and check
if it is closed .
Chemicals have been put into the
water tank
Never put chemicals or perfumes
into the water tank. Empty the
water tank, rinse it 2-3 times.
The steam trigger is overused .
Wait a few seconds between each
use. Check that the temperature
selector is at least on
••.
The iron produces little or no
steam.
The water tank is empty.
Refill the water tank.
The valve has collected too much
limescale.
Clean the valve.
Temperature is not high enough and
anti-drip function automatically gets
activated to avoid water drops.
Check that the temperature
selector is at least on
••.
Flakes and white impurities
come out during ironing.
The iron has limescale formations
inside the steam chamber.
Run the descaling procedure
(clean the steam chamber and the
valve).
The spray function or the
steam shot do not work
properly.
The water tank is empty.
Refill the water tank.
Subject to change without notice.
Please do not dispose of the product in the household waste at the end of its useful
life. Disposal can take place at a Braun Service Centre or at appropriate collection
points provided in your country.
11
DLB259293_5712710671_Use_Instruction_SI7_INT_Update.indb 11
03.06.17 09:13
