background image

The

Braun Corporation

NUVL855R

02-00025

11/12/2007

1-800-THE-LIFT

BRAUNMOBILITY.COM

®

MFG DATE

SERIAL NUMBER

®

DOT Public Use Lift MODEL#

Max. Lifting Capacity - 750Lbs.

5,305,486

PATENT

e5*72/245*95/54*0102*00

 

We at The Braun Corporation wish to express our fullest appreciation

on your new purchase.  With you in mind, our skilled craftsmen have designed and 
assembled the finest lift available.
 

This manual provides service-related material.  Refer to the FMVSS No. 403 

Quick Reference Installation Sheet for installation instructions, operating instructions 
and maintenance procedures.
 

Braun UVL Series

 lifts are built for dependability and will provide years of plea-

sure and independence as long as the lift is installed and serviced as specified by a 
Braun certified technician, and the lift is operated by an instructed person.

  

Sincerely,

 

 

THE BRAUN CORPORATION

 

 

 

 

 

 

Ralph W. Braun

 

 

Chief Executive Officer

OWNER'S WARRANTY REGISTRATION

PURCHASED FROM

DATE INSTALLED

NAME

ADDRESS

CITY

TELEPHONE

TO VALIDATE WARRANTY

REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION.

OWNER

STATE

ZIP

Sample Warranty/Registration Card

Two Braun Serial No./Series No. identification tags (shown below) are posted on the lift.  One 
I.D. tag is posted on the left platform side plate (outboard end).  A second I.D. tag is located 
inside of the pump module.  Both I.D. tags provide the product identification information 
provided on the warranty/registration card.  Record the information in the space provided (or 
document on a copy).  

This information must

 

be provided when filing a warranty 

claim or ordering parts

.

Warranty and Registration Instructions

Immediately upon receiving the lift, examine the 
unit for any damage.  Notify the carrier at once 
with any claims.

Two warranty/registration cards (shown right) are 
protected in a clear envelope and attached to the 
lift protective shipping wrap.  The sales representa-
tive must process one of the cards.  The consumer 
must fill out the other card and mail it to The Braun 
Corporation.  A detailed warranty section is provided 
in this manual.  The

 warranty cards must be 

processed to activate the warranty

.

Congratulations

Model No.

Series No.

Serial No. 

Pump Code  

Cylinder Code 

Date of Manufacture

Sample Serial No./Series No. Identi

fi

cation Tag

NUVL855R                    02-00025

Serial No.

Model No.

Series No.

Summary of Contents for Under-Vehicle Lift NUVL855R







































Reviews: