Page 15
the event of platform drift. Due to
the “all-hydraulic” operation of the
dual-cylinder CL917, hydraulic
fluid expansion, contraction or
seepage may occur. Any of these
conditions may result in platform
drift (failure to hold the platform in
the folded or raised position).
Platform drift may occur during lift
shipment and/or between ex-
tended periods of non-lift use.
In the event the platform does
not unfold when the UNFOLD
switch is pressed, press the
FOLD switch momentarily to
disengage the Lift-Tite
™
latches
(platform drift has occurred).
Then, press the UNFOLD switch
to unfold the platform to floor
level (standard operation).
When manually operating a lift
equipped with Lift-Tite
™
latches,
insert the pump handle in the
pump and stroke until the plat-
form folds fully (stops). Then,
open the hand pump valve (turn
counterclockwise) to unfold the
platform.
Folding the platform fully first will
ensure that the Lift-Tite
™
latches
will disengage properly when
the release valve is opened (in
event of platform drift). Manual
Pre-Lift Operation Notes and Details
Disengaged
Lift-Tite
™
Latch
Latch
Engagement
Pin (Roller)
