background image

www.brasscraft.com

Acquaint yourself with the functions and controls prior 

to using this machine. Should you have any questions 

about the operation or use of this machine, please call 

Customer Service (toll free) at 877-272-7755. If you have 

any uncertainties about how to use this machine, contact 

a drain cleaning specialist.   

Failure to follow the 

instructions and warnings may result in electric shock, 

fire, serious injury or even death.

Make Sure This is The Right Tool For Your Job

• 

This cable drum machine is intended for use in 

sinks, tubs, floor drains and roof stacks with 2 inch 

to 4 inch diameter lines.

• 

This machine is NOT designed to clear tree roots 

from pipes 

– attempting to clear tree roots can result 

in injury and will damage the machine/cable, in-turn 

voiding the warranty. For clearing root disturbances, 

utilize a larger drain cleaning machine such as the 

BrassCraft 650 series. 

• 

Do not modify this product or use it for anything 

other than its intended purpose.

 Only use equipment 

suggested by the manufacturer. Alterations or other 

improper use could result in personal injury or damage 

to the product also nullifying the product warranty. 

Personal Protection Equipment

• 

Wear snug fitting leather gloves when operating this 

machine. 

Never grasp the rotating cable with anything 

else, including a rag or non-leather gloves.   

• 

Wear safety glasses or eye protection

     

 

• 

Exercise cleanliness. 

Use hot soapy water 

to clean hands and other body parts that may have been 

exposed to drain cleaning contents. To reduce the risk 

of contamination and illness, do not eat or smoke while 

cleaning drain.

Personal Safety

• 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do not 

use a power tool while you are tired or under the 

influence of drugs, alcohol or medication. 

A moment 

of inattention while operating power tools may result in 

serious personal injury.

• 

Use personal protective equipment. 

Always wear eye protection. 

Protective 

equipment such as dust mask, non-skid safety shoes, 

hard hat, or hearing protection used for appropriate 

conditions will reduce personal injuries.

 

WARNING indicates a hazardous 

situation that, if not avoided, could result in death or 
serious injury.
Save all warnings and instructions for future reference.

•  The term “power tool” in the warnings refers to your 

mains-operated (corded) power tool or battery operated 

(cordless) power tool.

• 

Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the 

switch or energizing power tools that have the switch 

on invites accidents.

• 

Do not overreach. Keep proper footing and balance 

at all times. 

This enables better control of the power 

tool in unexpected situations.

• 

Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair, clothing and gloves away 

from moving parts. 

Loose clothes, jewelry or long hair 

can be caught in moving parts.

Read all safety warnings and instructions.  

In this Operation Manual and on the product, safety 

symbols and signal words are used to communicate 

important safety information.  This section is provided to 

improve understanding of these signal words and symbols.

?

•  This is the safety alert symbol. It is 

used to alert you to potential physical 

injury hazards. Obey all safety 

messages that follow this symbol to 

avoid possible injury or death.

?

•  This symbol signifies the importance 

of the user to read the operator’s 

manual carefully prior to using the 

machine.  The manual encompasses 

essential information regarding the 

safe and proper operation of the 

equipment.

•  This symbol denotes the significance 

to always wear safety glasses with 

side shields or goggles when handling 

or using this equipment to reduce the 

risk of eye injury.

•  This symbol denotes the risk of 

fingers getting trapped in a belt and/

or pulley.

 

•  WARNING indicates a hazardous 

situation that, if not avoided, could 

result in death or serious injury.

•  This symbol indicates the risk of 

hands, fingers or other body parts 

being trapped, wrapped or crushed in 

the drain cleaning cable.

•  This symbol designates the risk of 

electrical shock.  This could result in 

death if the machine is plugged into 

an improperly wired outlet.

?

SAFETY SYMBOLS &  

SIGNAL WORD

CABLE DRUM MACHINE 

SAFETY

Summary of Contents for BC3020









Reviews: