Branson 20R series Operator'S Manual Download Page 77

Page: 77 / 151

• • •

FUNCTIONS

2. SEAT

Never attempt to adjust your seat while the

tractor is moving. The seat could respond

with unexpected movement, and the ensu

ing loss of tractor control could lead to an

accident.

CAUTION

Fore and Aft positioning : Lift handle and move

the seat forward or rearward. Release the handle

at one of several positions.

Back cushion angle adjustment : Lift the handle

and let the back cushion spring forward, or lean

backward into the cushion. Release the handle at

desired position

Weight adjustment : With seat in mid-position,

extend the crank lever from knob and rotate mi

nus(-) direction for less support or Plus(+) for

more support. Use the indicator for approximate

weight setting. Release crank lever

20R OPERATORS MANUAL (030712).indd 77

3/8/2012 4:04:13 PM

Summary of Contents for 20R series
























































































































































Search results

Summary of Contents for 20R series

Reviews:

Brands by name

Popular brands

Branson 20R series, Operator'S Manual

Search results

Summary of Contents for 20R series

Reviews:

Brands by name

Popular brands