MANUAL P/N 900000106 REV A
10
3
Unpacking and Installation
3.1
Unpacking
Carefully remove the FTSU-100D from the shipping carton. The following items should be included in the
shipment:
•
1 FTSU-100D
•
1 power cord
•
1 user guide
Note the power entry module on the rear of the FTSU-100D chassis. Please take note of the voltage
displayed on the rear of the power entry module and verify that the voltage matches the local line’s voltage.
Insert the provided power cord into the rear of the power entry module and connect the power cord to an
AC power outlet.
CAUTION:
THE FTSU-100D WILL BE DAMAGED IF THE INCORRECT AC LINE SETTING IS USED
.
WARNING:
REMOVE THE POWER CORD FROM THE FTSU-100D BEFORE
ADJUSTING THE LINE VOLTAGE.
If the AC line setting is incorrect, detach the power cord from the power entry module. Use a small
screwdriver to lift up the fuse cover on the power entry module to remove the fuse holder. Reverse the fuse
holder and re-insert the fuse holder, making sure that the correct AC line voltage is now displayed on the
rear panel.
3.2
Installation
The FTSU-100D may be bolted directly into a 19” rack mount enclosure or mounted by rack mount slides.
The FTSU-100D, when fully populated, has up to 30 cables attached to the rear panel,
therefore it is
recommended that some appropriate cable strain-relief system be used to support these cables,
particularly when not using rack mount slides.
