87
GB
Connecting your machine
Connecting to the cold water
supply
Connect the water hose
(Fig. 6):
- By screwing the elbowed end to the
connection on the back of the machine
- By screwing the other end to a tap fitted
with a threaded end piece diameter 20x27
(3/4 BSP).
If you use a self-piecing tap, the useful
opening must be at least 6mm in diameter.
To avoid any water leaks, remember to
fit the rubber seals in each end and
tighten your connections correctly. The
seals are provided in the accessories
bag.
Water supply:
-- Minimum water pressure: 0.1 MPa or 1 bar
-
Maximum water pressure: 1 MPa or 10 bars
Fig. 6
