96
GB
Altering a washing programme
During programming :
Any alteration is possible before you press the
"Start/Pause" button
.
After the start of the cycle:
• You cannot alter the type of textile (for instance,
switch from "COTTON" to "SYNTHETICS" or
from "SYNTHETICS" to "DELICATES" etc.).
To change the type of textile during a cycle,
you must cancel the current programme and
then programme a new cycle.
• You can alter the temperature at the start of
the washing phase, after putting the machine
in "Pause" mode.
• You can alter the spin speed during the whole
of the cycle before spinning commences.
• You can select "No Spin" 100 and "Hold and
Rinse"
up to the end of the rinsing phase
(until the "Rinse"
cycle progress light goes
out).
• You can modify your selected "Delayed Start"
throughout the whole of the waiting period
before the cycle effectively starts.
If you wish to cancel the "Delayed finish"
, time during this period, turn the knob
anti-clockwise until the time shown on the
display
can reduce no further (the time
displayed therefore corresponds to the
finishing time for your programme) and then
briefly press the
.
The cycle will start immediately
• When you have selected a "Delayed Start”, you
can only activate the "Pre-wash"
and
“
” (anti-creasing) options
during the period before the cycle effectively
starts.
• You can activate the "Extra rinse"
until rinsing
starts (until the "Rinse"
cycle progress light
illuminates).
• You can switch of any of the options throughout
the cycle, provided that the relevant action has
not already started.
At the end of the cycle:
When the "Stop" light
is lit:
-
You can programme a new cycle without
having to switch to the "Stop" position on the
knob
. All you have to do is press any of the
buttons
,
,
, or turn the knobs
or
.
The machine is then ready for a new
programme.
- If you press the "Start/Pause"
, button
directly after the end of the cycle, the machine
restarts the last cycle programmed, including
any options.
5
5
R
R
1
1
4
4
3
3
2
2
1
1
B
B
5
5
A
A
5
5
