10
Proceed as follows to remove the transit bolts:
1.
Use a spanner to loosen the four transit bolts then pull them out.
2.
Push the four transit bolt cover caps provided for this purpose into the
holes.
3.
Keep the transit bolts in a safe place for future reuse.
Adjusting the levelling feet
Warning!
•
The lock nuts on the four levelling feet must be tightened against
the washer dryer body.
1.
Check that the feet are still firmly attached to the washer dryer. If
this is not the case, return them to their original position and
tighten the nuts.
2.
Slacken the lock nut and turn the foot until it touches the floor.
3.
Adjust the feet and lock them into position using a spanner.
Check that the washer dryer is stable.
