34
Installing your dishwasher
EN
Draining away the waste water
Length of the drain hose: standard
1.50m. If necessary, you can
increase the length of the drain
hose (4m max.). In this case, check
that the machine drains correctly.
Connect the drain hose:
- To a ventilated siphon
- To a sink U-bend
Remove the stopper form the
U-bend.
Remove the rubber stopper and, if
necessary, add a collar.
- Directly to your sink.
Ensure that you hold your drain
hose in place with the end
connector to avoid flooding.
For machines installed in columns,
the height of the drain hose must
not be higher than the top of the
machine.
Electrical connection
Mains voltage: 230V
Fuse: 10A, 13A or 16A
The socket outlet
must be
grounded to Earth
.
In all cases, the connection must
comply with the standards in force
in the country concerned, together
with the supplementary regulations
of the Electricity Authority. The
machine must be switched off when
the connection is made to the
electrical circuit.
If you have any doubts regarding
the condition of your installation, do
not hesitate to have it checked by a
qualified electrician.
The machine must be installed so
that the socket remains accessible.
We cannot be held
liable for any damage
caused by the faulty earthing
of the machine.
NB: Pull the pipe
gradually when
installing it to avoid
kinking it.
