Brandt VF 300 Series, Operating Instructions Manual

Page: 21 / 27

41
40
Running maintenance
Regularly proceed to clean (if
required):
All around the door and the door
seal with a damp sponge to
remove any deposits.
Every year
To ensure your machine’s long-
term operation, clean it once or
twice a year by running an
Intensive programme with the
machine empty, using a commer-
cially available special dishwasher
cleaning product.
Prolonged stoppage
Clean your dishwasher completely,
then disconnect the power supply
and close the water tap.
Keep your machine away from the
risk of frost.
Only use soap and
water on the casing
and the control panel.
Do not use abrasive powders,
metal sponges, alcohol-based
products or thinners.
Use a soft cloth or a sponge.
If you are moving,
to avoid any water leaking,
first of all run a Soak program-
me.
Running maintenance
Cleaning the waste filters
The filtration system consists
of several components:
A – The two-part waste filter
B – The main filter
C – The micro-filter
The filters are located in the mid-
dle of the tub and must be
cleaned regularly to ensure opti-
mum washing results.
A
A - Two-part waste filters.
➀ ➀
Before removing the filters, remove any
waste from the main filter with a spon-
ge to avoid the waste blocking the
sprinkling arms.
➁ ➁
Unscrew the waste filter a quarter turn
and remove it.
③ ③
Remove the main filter
④ ④
Remove the micro-filter.
Important: Do not
forget to lock the
waste filter by turning it a
quarter turn.
B
C
⑤ ⑤
Carefully clean all the filters
under running water.
To re-inset the filters
Follow the above instructions in
reverse.
C