background image

4

It is very important that you keep this booklet together with the equipment for any future 

consultation.

If this equipment should be sold or transferred to another person, make sure that the new 

user receives the booklet, so that he can learn how to operate the appliance and read the 

corresponding notice.

This is a Class 3 appliance.

The  manufacturer  refuses  all  responsibility  for  possible  damages  to  things  or  people,  resulting 

from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.

GENERAL NOTICE

This appliance complies with the following Directives: 

EEC 90/396 (Gas)    

 

 

EEC 2004/108/CE (Electromagnetic Compatibility) 

2006/95/CE (Low Voltage)    

 

EEC 89/109 (Contact with foods)

T

 - he  installation  must  be  carried  out  by  experienced  and  qualified  personnel,  in  conformity  with  the 

regulations in force.

This appliance is not intended for use by person (including children) with reduced physical, sensory or 

 -

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction cencerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

 -

While the appliance is running, watch the children and make sure they neither stay near the equipment, 

 -

nor touch the surfaces that have not cooled down completely.

Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the 

 -

“installation” paragraph).

Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool 

 -

down.

Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.

 -

In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for 

 -

example by opening a window or increasing the mechanical suction power, if it exists.

The products of combustion must be discharged outside through a suction hood or an electric fan (see the 

 -

“installation” paragraph).

For  any  possible  operation  or  modification,  apply  to  an  authorized Technical Assistance  Centre  and 

 -

demand original spare parts.

The product label, with the serial number, is sticked under the hob.

Summary of Contents for TG890XC













Reviews: