31
Installing your hob in all simplicity
- Place the hob in position in the cutout
on the worktop, pulling it forward as far
as possible.
- Put the burners, caps and pan grates
in place.
- Connect the hob power supply cable
to the electrical installation of the kit-
chen. (See "
Electrical connections
" ).
- Connect to the gas (see "H
ow to
connect the hob to mains gas
" or
"
How to connect the hob to butane
/ propane gas
".
If you want, you can fix the hob in posi-
tion on its four corners, using the four
lugs and screws provided (See dia-
gram).
Only use the holes provided.
Stop screwing when the lug starts
to bend.
Do not use a power screwdriver.
F
itting recommendations (cont'd)
Underneath the hob (carter)
Seal
Worktop
Fixing lugs
Fixing lugs
F
RONT
Fixing lugs
B
ACK
99628881_ML_AWS.qxd 09/07/03 15:33 Page 31
