Brandt KG365TE1, Manual For Installation And Use

Page: 11 / 28

M Ma aiin ns s g ga as s ((n na attu urra all g ga as s o orr a aiirr p prro op pa an ne e // a aiirr b bu utta an ne e))
➡ ➡
B Bu utta an ne e // p prro op pa an ne e g ga as s
- Remove the knobs.
- Using a small screwdriver, screw in the brass screws of each tap (top and oven).
- Replace the knobs, light each burner in turn and gently set to the minimum position.
- Switch from full flow to reduced flow several times to check that the adjustment is correct.
B Bu utta an ne e // p prro op pa an ne e g ga as s
➡ ➡
M Ma aiin ns s g ga as s ((n na attu urra all g ga as s o orr a aiirr p prro op pa an ne e // a aiirr b bu utta an ne e))
- Remove the knobs.
- Using a small screwdriver, unscrew in the brass screws of each tap (top and oven).
- Replace the knobs, light each burner in turn and gently set to the minimum position.
- Check that you obtain a stable flame and switch from full flow to reduced flow several times to
check that the adjustment is correct.
G Ga az z n na attu urre ell
➡ ➡
G Ga az z a aiirr p prro op pa an né é // a aiirr b bu utta an né é
- Remove the knobs.
- Using a small screwdriver, unscrew in the brass screws of each tap (top and oven).
- Replace the knobs, light each burner in turn and gently set to the minimum position.
- Check that you obtain a stable flame and swich from full flow to reduced flow several times to
check that adjustment is correct.
2 / INSTALLING YOUR COOKER
CHANGING THE TYPE OF GAS
SUPPLY
• •
• • Adjustment of the flow reduction for the taps of the hob burners.
(no flow reduction is to be carried out for the grill).
11
99626797_GB_A.QXD 13/07/2005 15:06 Page 11