
After you have programmed in the times you can still:
- Change the length of cooking time
- Check how much time is left for the food to cook
by pressing «
»
- Cancel the programme by keeping your finger on the «
»
button until you hear a beep.
Warning! At this point you must switch the temperature and
method controls off; otherwise the oven will start warming up
again.
• Press the + and - buttons to enter the length
of time the food is to cook for.
The example shown is 25 minutes
As soon as you press the + button the blinking stops.
• Now press the
button until the timer display
starts blinking again. At the same time, you will
notice the end of cooking symbol blinks too.
• You can now enter the time you want the cooking
to finish using the + and - buttons.
The example shows cooking to stop
at 1 pm (13:00)
If you forget to confirm use time , the oven automati-
cally confirms it after a few seconds.
The oven works out when to switch on so that the food
finishes cooking at the time selected.
When the oven switches on, the end of cooking symbol
will go out and the cooking time symbol will come on.
At the chosen time for the cooking to stop
- The oven switches off,
- The cooking time symbol goes out,
- The display shows 0:00
- The oven gives a series of bleep for several minutes.
To stop the bleeping, press any of the buttons on the panel. The time of day
will then be displayed again.
14
H
o w t o u s e y o u r o v e n
99625772_GB_A.qxd 21/02/03 10:42 Page 14