The cont rol pane l can be clea ned by using a lightly dampened cloth.
After cleaning, m ake sure to dry it thoroug hly.
For t he exterior, use a good appliance pol ish w ax.
Never use sharp objects, scouring pads or harsh cleaners on a ny part of the dishwasher.
Warning
1 .Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain t he water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe t o the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak u p water in the sump.
please take frost protection measures on t he dishwasher in winter. Every
fter washing cycles,
please operate as follows
time a
：
Cleaning the Filter
Cleaning the Door
To clean the coarse fi lter and the f ine f ilter, use a c leaning b rush. R eassemb le the fi lter p arts as show n in the figures
on the last page and reinsert t he entire assembly in the dis hwa sher, positio ning it in its seat and pressing dow nwards.
When cleaning the filters,
Otherwise, the filters could be
contorted and the perform ance of the dishw asher could be decreased.
do not knock the m.
To cle an the edge around the door, you
To avoid pene tration o f water into the door lock and electrical components, do not
use a spray cleaner of any kind.
sh ould only use a s oft, ward and damp
cloth.
Never u se a spr ay cleaner t o clean t he door panel as it m ay dam age the door loc k
and electrical components.
Abrasive ag ent s or som e paper towels shou ld not be used becau se of the risk of
scratching or leaving spots on the stainl ess steel surface.
Cleaning the Spray Arms
I f your dishwasher cannot work because of the ice,
please contact professional service persons.
I t is necessary to clean the spra y arm s re gularly fo r hard
w ate r che micals w ill clog the sp ray arm jets a nd bearings.
- A fter each cyc le, c hec k for any deb ris i n the filter to avo id fu ture blockag e.
- By unscrew ing the coarse fi lter, you can rem ove the filter system . Re move any foo d remna nts and
clean the fi lters under runni ng water.
Remarks:
The entire filter assembly should be cleaned once a week.
To remove th e lower spray arm, pull out the spray arm u pwa rd.
To remove the up per spray arm, hold the nut, rotat e the arm
clockwise to remove i t.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
