If your model has broken remember function, the machine will go on to finish the selected
program
.
after the power cut
When the wo rking cycle has fi nished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
t he appliance usi ng the O N/O FF button, shut off the wa ter supp ly and open the door of the di shw ashe r.
Wait for a few minutes bef ore unlo ading th e dishwasher to avoi d ha ndlin g the dishes and utensils while th ey
are still hot and m ore suscept ible to break . They wi ll also dry be tter.
Switching Off the Dishwasher
The program light is on but is not blinking,
1.Switch off the dishwasher by pressing the On/Off Button.
2.Turn off the water tap!
only in this case has the program en ded.
Open the door carefully.
Hot dishes are sensitive
minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
shocks . The dishes should c ool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishwasher to be wet inside.
If you open the door
, the ma chine will pause. The program light w ill
stop blinking and the buzzer w ill mooing every minute unless you cl ose the door . After
you close the door ,the machine will keep on working after 10 seconds.
dur ing a w ash cycle
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
6
Press the Start/Pause Button to stop the washing.
Press t he Start/Pau se B utto n. The d ishwasher w ill ru n
after 1 0 se cond s.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
Changing the Program Mid-Cycle
Premise:
A
running for a short time. Otherwi se, the
detergent m ay have already be en released, a nd the appliance m ay have already drained the wash water.
If t his is the case , the detergent dispenser must be refil led (see the section ent itled " Loading the
Detergent " ).
running cycle c an only be changed if it has only been
Press the Start/Pause button , the machine will pause, press the pro gram butt on more t han 3s then you
can change the program to the desired cycle setting (s ee the section entit led " Starting a wash cycle. . ." ).
1
2
When you press the Start/Pause button to pause during washing, the
will
stop blinking and the dishwasher w ill mooing every minute unless you press the
Star t/Paus e button to start.
running indicator
