43
Meaning of the symbols and functions that can appear on your screen
Starting up and adjusting the appliance
EN
REFRIGERATOR COMPARTMENT
Setting for your refrigerator's temperature (on the left of your screen)
• Set approximately by degree from 0 to 8°C.
Stopping and restarting the refrigerator compartment
• In refrigerator temperature setting mode, when you are adjusting the temperature
a "-" appears between 0° and 8°. This position enables you to stop the refrigerator
compartment. Press the knob to confirm.
Refrigerator temperature OK indicator
• The OK indicator appears on your appliance's screen when the temperature of the
coldest zone is at least 4°C. This means that the temperature is correctly set.
• If the temperature rises, the indicator light goes out and you must reset the refrig-
erator compartment's temperature.
Super Cool function
• This temporarily lowers the refrigerator's temperature to return to the ideal food
conservation temperature as quickly as possible (prolonged opening of the door, re-
frigerator being stocked up, etc.)
• It stops automatically after 6hours or can be stopped manually by deactivating the
function.
Ventilation function
• Electronically stops/starts the fan for regulated or circulated cold (see the Ventilation
section).
•
When the fan stops, it simultaneously stops the Super Cool and Biolyse functions
if they are activated.
"Holidays" function
• this enables you to leave the refrigerator running while you are away, keeping the
temperature at around 14°C to avoid bad smells developing and reducing your elec-
tricity consumption.
• The symbol appears instead of the refrigerator temperature when the function
is activated.
• To stop the Holidays option, simply deactivate the function or set your refrigerator's
temperature.
Biolyse function
• An anti-bacterial, anti-odour system
• the fan starts automatically if this function is activated because this is necessary for
maximum efficiency (see Biolyse section).
Under vacuum
• When you connect the 'under vacuum' box in your refrigerator, the indicator light
illuminates and the strips on the right of the light gradually descend as the vacuum
is produced.
• The light goes out when the box is disconnected from the pump.
• If the box is wrongly connected, the bars start to flash and a warning beep sounds
(see Under Vacuum section).
Summary of Contents for CE3321X
Page 59: ...59 Notes EN ...
