37
Starting the appliance and
setting the freezer's thermostat
Turn the general "Start" knob to start the ap-
pliance. When you wish to interrupt the ap-
pliance's operation (including the refrigerator).
Move the knob to position
.
To set the freezer's temperature, turn the
"Freezer Thermostat" knob.
Position 1 indicates the least cold setting: po-
sition 7 the coldest setting. AN intermediate
setting is usually advisable.
Green "ON" LED
This LED light s up when the appliance starts.
WARNING! When the thermostat is
in the
position and the "ON" LED
is out, the appliance is still recei-
ving power.
Disconnect the appliance before performing
any work on it.
"Quick Freeze" button
The "Quick Freeze" function enables you to
lower the freezer's temperature rapidly to the
maximum extent in order to freeze a large
amount of fresh food more quickly.
Press in the "Quick Freeze" button 24 hours
before inserting the food in your freezer.
This function stops automatically after 52
hours unless you interrupt it manually before
this.
Yellow "Quick Freeze" LED
This LED confirms that the "Quick Freeze"
function has been activated.
Red "Alarm" LED
This LED indicates that the temperature in the
freezer is too high (owing to a power failure,
damage, etc.). Check that the food in the free-
zer has not defrosted, even partially, and acti-
vate the "Quick Freeze" function. Keep the
door closed. After approximately 2 hours
check that the red LED has gone out. Then set
the thermostat, if necessary, to a colder set-
ting.
If the LED remains lit, call your After-Sales Ser-
vice.
The red LED may light for a brief period during
rapid freezing, when the door si kept open for
a prolonged period or when inserting a large
quantity of fresh food.
Starting and adjusting the appliance
EN
Red alarm led
General start button/
Quick freeze
Yellow quick freeze led
Freezer green
ON led
Freezer thermostat
Refrigerator green
ON led
Refrigerator thermostat
Light switch
Summary of Contents for CE3020
Page 26: ...26 Notes FR...
