Brandt BXP6555XS, User Manual

Page: 28 / 89

ENGLISH
Settings
6
Anomalies and solutions
7
REMOVAL
Open the door fully and block it with the plastic
wedge provided in your appliance’s plastic pouch.
Remove the first clipped glass panel:
Use a tool (screwdriver) to press the slots A in order
to unclip the glass panel.
Remove the glass panel.
Depending on the model, the door consists of two
additional glass panels, with a black rubber spacer
at each corner. If necessary, remove them to clean.
Do not soak the glass panels in water. Rinse with
clean water and dry off with a lint-free cloth.
RE-ASSEMBLING THE DOOR
After cleaning, reposition the four rubber stops with
the arrow upwards and reposition all of the glass
panels.
Slip the last glass panel into the metal stops, then
clip it in with the shiny side facing outwards.
Remove the plastic wedge. Your appliance is now
ready for use again.
AUTO: In cooking mode ,
the light inside the oven
automatically turns itself
off after 90 seconds.
ON: In cooking mode, the
light is on all the time.
Activate/de-activate the
beeping sound of the
buttons
A c t i v a t e / d e - a c t i v a t e
demonstration setting
Activate/de-activate
memo active mode
A c t i va t e / d e -a c t i va t e
booster mode
You may resolve certain little problems yourself:
The oven is not heating.
Check that the oven
is correctly connected and that your installation’s
fuse is not out of service. Increase the selected
temperature.
The oven light is not working.
Replace the
bulb or the fuse. Check that the oven is correctly
connected.
The cooling fan continues to operate after
the oven stops.
This is normal; the fan may
continue running until a maximum of 1 hour after
cooking to lower the temperature inside and
outside the oven. If the fan runs for over an hour,
contact the After Sales Department.
The pyrolysis cleaning cycle does not
begin.
Check that the door is locked. If there is
a door locking or temperature sensor fault,
contact the Customer Services Department.
The symbol flashes in the display.
Door
locking fault; contact the Customer Services
Department.
6.1
MENU
You can adjust different settings on your oven.
To do so:
Press
until you get to the “MENU” display
then press again to select the different set-
tings.
Activate or de-activate the different parame-
ters with
and ; see table below.
To exit “MENU” mode, press until you get
to the clock display.
Warning
Do not use scouring cleaning products,
abrasive sponges or metal scrapers to clean
the oven's class door, which may scratch the
surface and lead to the glass breaking.
5.4
REPLACING THE OVEN LAMP
Bulb specification:
15 W, 220-240 V~, 300°C, E14 cap.
To unscrew the view port and the light, use a
rubber glove, which will make disassembly easier.
Warning:
Make sure the appliance is disconnected
from the power before replacing the lamp
in order to avoid the risk of electric
shock. Change the lamp only when the
appliance has cooled down.