16
EN
4 / PROGRAMMING YOUR MACHINE
●
: These functions can be used alone or in combinations:
no illogical combinations can be made.
•DETAILS OF THE PROGRAMMES
The main programmes provided by the machine are as follows:
•Cotton
If your washing comprises hard-wearing white or coloured COTTONS.
Important :
When washing coloureds do not exceed a maximum
temperature of 60°C.
NB :
During the first few minutes of the programme, your machine
automatically evaluates the washing load you have introduced and
adapts the water consumption and the length of the programme
accordingly to provide a perfect wash
•OptiA 45 min
This 40°C programme enables you to wash a usual 3kg load of cottons
and mixed textiles in 45 minutes while ensuring perfect washing results
and maximum energy savings.
•Synthetics
If your washing comprises of DELICATE COLOURS, HARD-WEARING
SYNTHETICS or MIXED FIBRES
•Wool /Delicates
If your washing comprises NETTING, DELICATE FABRICS, FRAGILE
TEXTILES or ”MACHINE-WASHABLE WOOLLENS”.
NB :
A programme with agitation and spin phases specially adapted to
these types of fabrics.
This programme is also suitable for washing textiles specified as ‘hand
wash’ only. For this, select position ”
”
.
•Flash 30min
This programme enables you to refresh a small load of 2.5 kg of lightly
soiled washing composed of WHITES, COTTONS, COLOUREDS or
HARD-WEARING SYNTHETICS.
The cycle time is restricted to around 30 minutes
In this programme, the washing temperature is automatically programmed
at 30°C.
Important :
For this programme, the doses of detergent should be
reduced by half.
•Rinse only
A separate rinse followed by a choice of:
— Either spin and drain
— Or drain only ("Drip-dry" option)
— Or a stop with the drum full of water.
•Spin only
This allows a separate spin and drain.
Important :
In the case of "Rinse only" followed by a spin or "Spin only",
ensure that you select a suitable spin speed for the type of washing
in the machine.
•Maintaining your machine’s performance
(Maintaining the pump filter):
You must clean the drain pump filter regularly (for how to do this, see the section “CLEANING THE PUMP FILTER”).
Important :
Your machine’s performance can be affected if you do not clean the pump filter regularly.
To select the most suitable programme for your type of washing, follow the instructions on the labels that most textiles bear.
•SOME EXAMPLES OF PROGRAMMES
Important :
* The cycle times are provided for an average value “without option”. They may vary according to the wash load, the temperature, etc.
—
If you programme a “Prewash”, you must add 18 to 25 minutes.
—
If you programme “Rinse plus”, you must add 17 minutes.
100
Programmes table
Type of textile
Maximum
weight of dry
clothes (kg)
Temperature
(°C)
Prewash
Rinse plus
Drip-dry
Rinse hold
COTTON
90°- 20°
60° -
30° -
6,0
●
●
●
●
●
●
●
●
●
2,5
1,5
SYNTHETICS
WOOL /DELICATES
Flash 30 min
OptiA 45 min
30°
2,5
●
●
●
●
●
●
●
Easy
ironing
Special programmes
Additional programmes
-
●
SPINNING
-
●
●
●
●
40°
3,0
RINSING
Cycle length *
h = hour
min = minute
32
min
- 41
min
45
min
30
min
18
min
10
min
1
h
19 - 1
h
41
1
h
26 - 3
h
08
•
TEST PROGRAMMES ACCORDING TO DELEGATED REGULATION (EU) No. 1061/2010
- Standard cotton programme at 60°C : Cotton - 60°C - no option - max spin.
- Standard cotton programme at 40°C : Cotton - 40°C - no option - max spin.
