P.24
P.25
No Machine Wash
Do not Wash
No Dry Clean
No Wring
No Bleach
Do not Tumble Dry
Do not Iron
Iron with Cloth
Dry after Wash
Line Dry in Shade
CI
CI
Care Lable
Graphic Symbol
Illustration
Graphic Symbol
Illustration
Hand Wash
Washing (including Machine
Wash and Hand Wash)
Dry Clean
Warmly Dry Clean
Bleach
Tumble dry
Iron
Steam Iron
Medium Temperature and
Max. Temperature 150 C
Line Dry
To avoid fire, electrical shock and other accidents, please remember the following
reminding:
- Only the voltage indicated in power label can be used. If you are not clear of the
voltage at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the washing
machine will reach 10A. Therefore, please make sure the power supply units (current,
voltage and cable) can meet the normal load requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will not trip
the people or other things and be damaged. Special attention shall be paid to the
socket. It shall be plugged into the sockets easily and attention shall be paid to the
plug location.
- Do not make the wall-mounted socket overloaded or cable extended. Overloading
of the wiring may cause fire or electrical shock. Do not pull out power plug with wet
hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole
socket. Carefully check and ensure that your socket is properly and reliably earthed.
Appendix
Remove the problems
Display
Reason
Solutions
Open the water tap, to check if the inlet hose is
squashed or kinked, check the filter in the inlet valve
is blocked or not; check if the water pressure is too low.
Check if the drain pump is blocked.
Inlet water
overtime
of 7 min
Overtime 3min
of the drainage
The door has not
been closed over
3 times
Check if the door of the washing machine is closed
Check if the clothes is pinned by the door.
Others
Please call up our service Hotline if there is any other problem.
LED
