9
Fitting recommendations (cont’d)
- Place the hob in position in the cutout
on the worktop, pulling it forward as far as
possible.
- Put the bumers, caps and pan grates back
in position.
- Connect the hob power supply cable to the
electrical installation of the kitchen. (See
“Electrical connections”).
- Connect the hob to the gas.
If you wish you can Iock the hob into position
using attachments that come with screws
(see right picture) and are secured to the
corners of the housing.
Only use the holes provided.
Stop screwing when the lug starts to
bend.
Do not use a power screwdriver.
The panel of this built-in hob is made of tempered glass which is safer than normal
glass for this application. However, the following safety precautions for using built-in
hob with glass top panel should also be noted in order to prevent the glass top panel
from breaking :
1. Clean the burner assembly frequently to maintain a clear gas passage on the
fl
ame distributor. Clean and tidy up the
fl
ame distributor after spillage of food and
liquid once the bumer assembly cooled down.
2. Turn off the gas appliance immediately if abnormal noise propagates from the gas
appliance and contact gas supply company or gas hob importer for inspection.
3. Do not use oversized ustensils for cooking.
4. Do not impact the glass surface with hard objects or place heavy objects on the
glass surface.
Fixing
lugs
Worktop
Holes for
fi
