Brandt BFL663ZNX, Instruction Manual

Page: 52 / 68

5
●Switch off the appliance and
disconnect it from the mains power
before you clean or move it.
●Never unplug the appliance by
pulling on
the electrical cord. Always
grip the plug firmly and pull straight
out from the socket to prevent
damaging the power cord.
●Don’t operate the appliance without
the
light cover of interior lighting.
●Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service
engineer. Only genuine spares should
be used.
●Don’t use electrical appliances such
as ice cream makers inside the food
storage
compartments of the
appliance, unless they are approved
by the manufacturer.
●Don’t look direct into the LED light
located
in the refrigerator
compartment with optical instruments
to avoid eye injuries. If it is not
functioning
correctly, consult a
qualified, registered electrician or
replace it in accordance with the
“cleaning and care” chapter.
Refrigerant
The refrigerant isobutene (R600a) is
contained within the refrigerant
circuit of the appliance, a natural gas
with a high level of environmental
compatibility, which is nevertheless
flammable. During transportation and
installation of the appliance, ensure
that none of the components of the
refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
Caution: risk of fire
●Don't store products which contain
flammable propellants (e.g. spray
cans) or explosive substances in the
appliance.
Should the refrigerant circuit be
damaged:
● Avoid opening flames (candles,
lamps
etc.) and sources of ignition.
●Thoroughly ventilate the room in
which the appliance is situated.